When do I choose the MB 2800 over the MB 2300?
The MB 2800 is suitable when higher air volume or pressure build-up is required. This model is often used in medium to heavier duty applications.
How energy efficient is the MB 2800?
The efficient high-speed principle allows the MB 2800 to replace traditional higher-powered blowers in many applications, resulting in significant energy savings.
Can the MB 2800 be frequency controlled?
Yes. The blower is capable of frequency control, allowing flexible adjustment to varying process conditions.
Is the MB 2800 suitable for pneumatic transport?
Yes, provided the operating point is determined correctly. For powders and granules, the MB 2800 can provide an efficient and stable air supply.
What is the difference between a turboblower and a conventional blower?
A turbo blower, such as the Master Blower series, operates on a high-speed principle in which air is efficiently moved at very high speeds. As a result, for comparable air performance, it is often possible to operate at lower motor power than conventional blowers or side channel blowers.
Key differences:
- Higher efficiency at the same air volume
- Lower energy consumption at correctly selected operating point
- More compact construction at higher performance
- Suitable for frequency control and precise process tuning
In high duty cycle applications, this can result in significant energy savings and lower operating costs.
The exact differences depend on the operating point and application. DOVAC supports an objective comparison based on air volume, pressure and operating time.
Master Blower MB 2800
The Master Blower MB 2800 is a powerful high-speed turboblower for applications where higher air volumes and stable process air are required, while maintaining low energy consumption. Thanks to its high-speed principle (up to approximately 20,000 rpm), the MB 2800 delivers high performance at significantly lower power consumption than traditional blowers.
This makes the MB 2800 very suitable for industrial processes with high operating times, where energy efficiency and reliability play an important role.
Key features
- Highly energy efficient relative to air volume and pressure
- High capacity with strong pressure build-up
- Suitable for both blowing and sucking
- Flexibly adjustable by frequency, easily tuned to the operating point
- Stable process air for continuous or intensive cyclic operation
Energy efficiency & cost savings
The MB 2800 is often used as an alternative to conventional blowers with higher power ratings. With more efficient air generation, lower motor power is sufficient in many applications without sacrificing process performance.
Indicative calculation example
A common situation is the replacement of a traditional blower of about 18.5 kW with an MB 2800 with 11 kW.
- Power reduction: 7.5 kW
- Electricity price: €0.50 per kWh
This results in:
- €3.75 savings per hour
- €30 per day (for 8 hours of operation)
- €600 per month (20 working days)
- approximately €7,200 per year
In applications with longer run times or multiple installations, these savings can increase further, so the payback period of the MB 2800 is often relatively short in practice.
Actual savings depend on the operating point, control and operating time. DOVAC assists in determining the optimal power and the corresponding savings potential.
Technical versions MB 2800
The MB 2800 is available in several power versions:
MB 2800 / 11
- Motor power: 11 kW
- Max. air volume: approx. 2,510 m³/h
- Max. vacuum: approx. -175 mbar
- Max. overpressure: approx. 225 mbar
MB 2800 / 15
- Motor power: 15 kW
- Max. air volume: approx. 2,900 m³/h
- Max. vacuum: approx. -220 mbar
- Max. overpressure: approx. 270 mbar
MB 2800 / 18.5
- Engine power: 18.5 kW
- Max. air volume: approx. 2,900 m³/h
- Max. vacuum: approx. -220 mbar
- Max. overpressure: approx. 270 mbar
Typical applications
The Master Blower MB 2800 is widely used in:
- Drying processes within packaging and production lines
- Cooling of machines, components and processes
- Pneumatic conveying of powders and granules
- Industrial automation with constant air demand
The combination of higher capacity and energy efficiency makes the MB 2800 particularly suitable for medium to heavier duty applications where continuity and cost control are key.
Consulting & selection
For optimal operation, proper matching of air volume, pressure and control is essential. DOVAC supports the selection of the right MB 2800 version and helps to understand possible energy savings within your specific application.
Why Master Blower at DOVAC?
DOVAC is the exclusive partner of Master Blower for the Benelux. This makes us the permanent point of contact for selection, delivery and technical support within this region.
When selecting a turboblower, we look not only at the maximum air volume, but especially at the right operating point, energy consumption and operating time. In this way, not only is the right version selected, but the actual savings potential is also revealed.
For technical questions, comparison with existing installations or support in replacing conventional blowers, we are happy to think along with you
